Dynavector -- DV 10X5
High Output MC-Ssytem
ArtikelNr: DV 10X5
Auf Lager, Lieferzeit 1-2 Werktage
-
Datenschutzbedingungen (bearbeiten im Modul "Kundenvorteile")
-
Lieferbedingungen (bearbeiten im Modul "Kundenvorteile")
-
Rücksendebedingungen (bearbeiten im Modul "Kundenvorteile")
Ein Japan-MC der „neuen Generation": Lupenreine Wiedergabe ohne allzu analytische Attitüde. Auffallend natürliche Klangfarben.
Description
The Dynavector 10X series High Output Moving Coil cartridge debuted in 1978 winning the prestigious Design and Engineering Award at the Chicago CES in both 1978 and 1981. The 10X series cartridges are also widely accepted at the benchmark in High Output moving coil cartridge at this price point and beyond.
With the introduction of the new 10X5 High Output moving coil there is no doubt Dynavector will retain this enviable position and again set the standard for high output moving coil cartridges.
Improvements
The 10X5 now features Dynavector's unique magnetic flux damping and softened magnetism (patent) along with powerful Neodymium magnet that combine to eliminate any hardness or irritating edginess that commonly occurs in many moving coil cartridges.
Dynavector are also renowned for the capability of winding the finest coil assemblies. This has enabled them to minutely increase the coil wire diameter of the 10X5 to achieve a reduction of impedance to 150 ohms whilst retaining a healthy 2.5mV output. This also ensures both a rugged and reliable circuitry.
The 10X5 also features a newly designed Aluminium head block with M2.5 thread to provide a rigid platform for the cartridge motor and secure fixing to the tonearm.
technische Daten:
Type: High output moving coil cartridge with flux damper and softened magnetism
Output Voltage: 2.5mV (at 1KHz, 5cm/sec.)
Channel Separation: 25 dB (at 1KHz)
Channel balance: 1.0 dB (at 1KHz)
Frequency response: 20 - 20,000Hz ( 2dB)
Compliance: 12 x 10-6 cm/dyn
Tracking force: 1.8 - 2.2 grams
DC resistance: R=150 ohms
Recommended load
impedance: >1K ohms
Cantilever: 6mm length aluminium pipe
Stylus: Elliptical
Weight: 7.3 grams
Description
The Dynavector 10X series High Output Moving Coil cartridge debuted in 1978 winning the prestigious Design and Engineering Award at the Chicago CES in both 1978 and 1981. The 10X series cartridges are also widely accepted at the benchmark in High Output moving coil cartridge at this price point and beyond.
With the introduction of the new 10X5 High Output moving coil there is no doubt Dynavector will retain this enviable position and again set the standard for high output moving coil cartridges.
Improvements
The 10X5 now features Dynavector's unique magnetic flux damping and softened magnetism (patent) along with powerful Neodymium magnet that combine to eliminate any hardness or irritating edginess that commonly occurs in many moving coil cartridges.
Dynavector are also renowned for the capability of winding the finest coil assemblies. This has enabled them to minutely increase the coil wire diameter of the 10X5 to achieve a reduction of impedance to 150 ohms whilst retaining a healthy 2.5mV output. This also ensures both a rugged and reliable circuitry.
The 10X5 also features a newly designed Aluminium head block with M2.5 thread to provide a rigid platform for the cartridge motor and secure fixing to the tonearm.
technische Daten:
Type: High output moving coil cartridge with flux damper and softened magnetism
Output Voltage: 2.5mV (at 1KHz, 5cm/sec.)
Channel Separation: 25 dB (at 1KHz)
Channel balance: 1.0 dB (at 1KHz)
Frequency response: 20 - 20,000Hz ( 2dB)
Compliance: 12 x 10-6 cm/dyn
Tracking force: 1.8 - 2.2 grams
DC resistance: R=150 ohms
Recommended load
impedance: >1K ohms
Cantilever: 6mm length aluminium pipe
Stylus: Elliptical
Weight: 7.3 grams
High Output MC-Ssytem
ArtikelNr: DV 10X5
Auf Lager, Lieferzeit 1-2 Werktage